Linux中的LVM之增加容量与删除卷的方法详解

放大LV容量涉及到LVM管理中的命令lvresize，我们先创建一个卷组VG VolGroup02，它建立在磁盘/dev/sdc （大小为8G）上。创建逻辑卷LV时，我们故意只使用了一小部分。具体情况如下所示

复制代码代码如下:
[root@localhost ~]# vgdisplay
--- Volume group ---
VG Name VolGroup02
System ID
Formatlvm2
Metadata Areas1
Metadata Sequence No1
VG Access read/write
VG Status resizable
MAX LV0
Cur LV0
Open LV 0
Max PV0
Cur PV1
Act PV1
VG Size 7.97 GiB
PE Size 32.00 MiB
Total PE255
Alloc PE / Size 0 / 0
FreePE / Size 255 / 7.97 GiB
VG UUID SETgjx-dobd-Uayt-AWgN-HKID-hsYe-tEotIS
[root@localhost ~]# lvcreate -L7.97 -n LogVol00 VolGroup02
Rounding up size to full physical extent 32.00 MiB
Logical volume "LogVol00" created
[root@localhost ~]# mkfs -t ext4 /dev/VolGroup02/LogVol00
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
8192 inodes, 32768 blocks
1638 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=33554432
4 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
8193, 24577

Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first.Use tune2fs -c or -i to override.
[root@localhost ~]# cd /
[root@localhost /]# mkdir /u01
[root@localhost /]# mount /dev/VolGroup02/LogVol00 /u01
[root@localhost /]# vi /etc/fstab

#
# /etc/fstab
# Created by anaconda on Mon Aug 17 15:08:21 2015
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=3440ad55-6486-45ed-876f-e942b08013bf / ext4defaults1 1
UUID=d3abb655-db70-4c42-967d-57c421abfda0 /boot ext4defaults1 2
UUID=660624ff-335d-42ca-b779-f130a80d9da8 /home ext4defaults1 2
UUID=6f534bf0-e486-4937-84ae-ed1221cf34f1 swapswapdefaults0 0
/dev/VolGroup02/LogVol00/u01ext4defaults1 1
tmpfs /dev/shmtmpfs defaults0 0
devpts/dev/ptsdevptsgid=5,mode=6200 0
sysfs /syssysfs defaults0 0
proc/proc procdefaults0 0



此时，我们要放大文件系统/u01的大小，那么就需要使用到lvresize 放大LV容量

复制代码代码如下:
[root@localhost ~]# lvscan
ACTIVE'/dev/VolGroup02/LogVol00' [32.00 MiB] inherit
[root@localhost ~]# lvdisplay /dev/VolGroup02/LogVol00
--- Logical volume ---
LV Path/dev/VolGroup02/LogVol00
LV NameLogVol00
VG NameVolGroup02
LV UUIDOCHwx1-EL9P-6C5J-RNuz-2Xu5-4215-H3xt5s
LV Write Accessread/write
LV Creation host, time localhost.localdomain, 2015-09-01 10:50:10 +0800
LV Statusavailable
# open 1
LV Size32.00 MiB
Current LE 1
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0

[root@localhost ~]# lvresize -L +7.89G /dev/VolGroup02/LogVol00
Rounding size to boundary between physical extents: 7.91 GiB
Size of logical volume VolGroup02/LogVol00 changed from 32.00 MiB (1 extents) to 7.94 GiB (254 extents).
Logical volume LogVol00 successfully resized



复制代码代码如下:
[root@localhost ~]# resize2fs -p /dev/VolGroup02/LogVol00
resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/VolGroup02/LogVol00 is mounted on /u01; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 32
Performing an on-line resize of /dev/VolGroup02/LogVol00 to 8323072 (1k) blocks.
The filesystem on /dev/VolGroup02/LogVol00 is now 8323072 blocks long.

[root@localhost ~]# df -h
FilesystemSizeUsed Avail Use% Mounted on
/dev/sda227G6.0G 20G24% /
tmpfs 5.9G 05.9G 0% /dev/shm
/dev/sda1 477M 32M420M 8% /boot
/dev/sdb199G 60M 94G 1% /home
/dev/mapper/VolGroup02-LogVol00
7.7G2.7M7.3G 1% /u01


如果我们此时在虚拟机上将磁盘从8G扩展为10G，那么要如何利用扩展的磁盘空间呢？


复制代码代码如下:
[root@localhost u01]# fdisk -l

Disk /dev/sda: 42.9 GB, 42949672960 bytes
64 heads, 32 sectors/track, 40960 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000462cf

Device BootStart EndBlocks IdSystem
/dev/sda1 * 2 501512000 83Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 502 2867228847104 83Linux
Partition 2 does not end on cylinder boundary.
/dev/sda3 28673 4096012582912 82Linux swap / Solaris
Partition 3 does not end on cylinder boundary.

Disk /dev/sdc: 8589 MB, 8589934592 bytes
64 heads, 32 sectors/track, 8192 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x98c391fe

Device BootStart EndBlocks IdSystem
/dev/sdc1 18192 8388592 83Linux

Disk /dev/sdb: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002488e

Device BootStart EndBlocks IdSystem
/dev/sdb1 1 13055 104856576 83Linux

Disk /dev/mapper/VolGroup02-LogVol00: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


重启过后才能看到/dev/sdc的空间变化情况。


删除物理卷
删除卷LVM管理中的命令vgreduce, pvremove：

   vgreduce：通过删除LVM卷组中的物理卷来减少卷组容量。注意：不能删除LVM卷组中剩余的最后一个物理卷

   pvremove: 用于删除一个存在的物理卷。使用pvremove指令删除物理卷时，它将LVM分区上的物理卷信息删除，使其不再被视为一个物理卷。

在删除物理卷PV之前，必须将服务器的分区信息、卷组信息、物理卷信息、逻辑卷信息都掌握清楚，避免出现失误或误操作。

复制代码代码如下:
[root@localhost ~]# fdisk -l

Disk /dev/sda: 128.8 GB, 128849018880 bytes
255 heads, 63 sectors/track, 15665 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device BootStart EndBlocks IdSystem
/dev/sda1 * 113104391 83Linux
/dev/sda214 1044383778975 8eLinux LVM
/dev/sda3 10444 1566541945715 83Linux
[root@localhost ~]# vgscan
Reading all physical volumes.This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
[root@localhost ~]# pvscan
PV /dev/sda2 VG VolGroup00 lvm2 [79.88 GB / 0free]
PV /dev/sda3 VG VolGroup00 lvm2 [40.00 GB / 40.00 GB free]
Total: 2 [119.88 GB] / in use: 2 [119.88 GB] / in no VG: 0 [0 ]
[root@localhost ~]# pvdisplay
--- Physical volume ---
PV Name /dev/sda2
VG Name VolGroup00
PV Size 79.90 GB / not usable 23.41 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE2556
Free PE 0
Allocated PE2556
PV UUID YGtB2J-ZKJr-mV62-NluQ-2DGy-vuUT-cCc1lo

--- Physical volume ---
PV Name /dev/sda3
VG Name VolGroup00
PV Size 40.00 GB / not usable 2.61 MB
Allocatable yes
PE Size (KByte) 32768
Total PE1280
Free PE 1280
Allocated PE0
PV UUID wsnv13-7j1H-SH8q-hl6k-HpNc-x4WU-gM7LzW

[root@localhost ~]# lvscan
ACTIVE'/dev/VolGroup00/LogVol00' [77.91 GB] inherit
ACTIVE'/dev/VolGroup00/LogVol01' [1.97 GB] inherit
[root@localhost ~]# lvs
LV VG Attr LSizeOrigin Snap%Move Log Copy%Convert
LogVol00 VolGroup00 -wi-ao 77.91G
LogVol01 VolGroup00 -wi-ao1.97G

vgreduce参数：
-a：如果命令行中没有指定要删除的物理卷，则删除所有的空物理卷；

--removemissing：删除卷组中丢失的物理卷，使卷组恢复正常状态。

复制代码代码如下:
[root@localhost ~]# vgreduce VolGroup00 /dev/sda3
Removed "/dev/sda3" from volume group "VolGroup00"
[root@localhost ~]#



复制代码代码如下:
[root@localhost ~]# pvscan
PV /dev/sda2 VG VolGroup00lvm2 [79.88 GB / 0free]
PV /dev/sda3lvm2 [40.00 GB]
Total: 2 [119.88 GB] / in use: 1 [79.88 GB] / in no VG: 1 [40.00 GB]
[root@localhost ~]# pvs
PV VG FmtAttr PSizePFree
/dev/sda2VolGroup00 lvm2 a- 79.88G 0
/dev/sda3 lvm2 a- 40.00G 40.00G
[root@localhost ~]# pvremove /dev/sda3
Labels on physical volume "/dev/sda3" successfully wiped
[root@localhost ~]# pvscan
PV /dev/sda2 VG VolGroup00 lvm2 [79.88 GB / 0free]
Total: 1 [79.88 GB] / in use: 1 [79.88 GB] / in no VG: 0 [0 ]